Dynomite Diesel New Stock Injector 22-24 Ram 6.7L Cummins
White smoke? Hard Start? Missing or ticking noises? No start at all? It could be that you have 1 or more bad injectors. While common rail injectors are a necessity with today's engines to create the efficiency and power, they are also susceptible to wear more so than older, non-common rail injectors, as they are exposed to extremely high pressures. Replace your faulty factory injectors with Dynomite Diesel's brand new stock power level injector for your 22-24 6.7L Cummins. There are 2 different types of 6.7L engine options available and they have different injectors. Please be sure to select the correct model of engine to insure you receive the correct injectors. Available in Standard Output and High Output for stock power levels.
- Injectors Sold Individually
Dynomite Diesel K-Factor Injector Nozzles – Precision. Performance. Power.
When
it comes to injector nozzles, it’s not just about how much fuel you can
dump, it’s about how efficiently you can deliver it. That’s where
Dynomite Diesel’s K-Factor technology sets itself apart from the pack.
Most aftermarket nozzles rely on standard EDM machining, quick, cheap,
and dirty. But Dynomite Diesel isn’t “most.” Instead of stopping at EDM,
they take it further with Advanced Flow Machining (AFM) and precision
honing that smooths out imperfections, polishes internal surfaces, and
radii the inlet of each orifice. The result? Clean, consistent spray
patterns that make more usable power, not just smoke and heat.
Why K-Factor Nozzles Matter:
- Removes Flow Restriction at Orifice Entrance: Eliminates the natural low-pressure zone where fuel enters the orifice, allowing smoother and faster flow.
- Better Fuel Atomization: Fine mist = cleaner burn. That means less black smoke, lower EGTs, and more bang per drop of fuel.
- Delivers More Fuel at Same Pressure: Pushes more volume through a smaller hole, yes, really. It’s about optimized shape, not just size.
- Reduces Turbulence: Smoother internal geometry minimizes swirl and pressure loss inside the nozzle, no flow drama here.
- Improved Power and Efficiency: With better atomization comes better combustion, and that means more horsepower, cooler temps, and increased fuel mileage.
- Less Smoke, More Go: Bigger isn’t always better, smoky, hot tunes waste fuel. K-Factor nozzles strike the perfect balance for performance builds and daily drivers alike.
Dynomite starts with blank nozzles or custom machined pieces based on specific spray angle requirements. Each nozzle goes through a proprietary honing process, no shortcuts. The end result? A nozzle that not only flows more but does so smarter, delivering cleaner, cooler, more efficient power than the competition. Whether you're building a mild street truck or an all-out track monster, K-Factor Nozzles give you the edge where it counts, in real world performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Dynomite Diesel New Stock Injector 22-24 Ram 6.7L Cummins
Dynomite Diesel New Stock Injector 22-24 Ram 6.7L Cummins
White smoke? Hard Start? Missing or ticking noises? No start at all? It could be that you have 1 or more bad injectors. While common rail injectors are a necessity with today's engines to create the efficiency and power, they are also susceptible to wear more so than older, non-common rail injectors, as they are exposed to extremely high pressures. Replace your faulty factory injectors with Dynomite Diesel's brand new stock power level injector for your 22-24 6.7L Cummins. There are 2 different types of 6.7L engine options available and they have different injectors. Please be sure to select the correct model of engine to insure you receive the correct injectors. Available in Standard Output and High Output for stock power levels.
- Injectors Sold Individually
Dynomite Diesel K-Factor Injector Nozzles – Precision. Performance. Power.
When
it comes to injector nozzles, it’s not just about how much fuel you can
dump, it’s about how efficiently you can deliver it. That’s where
Dynomite Diesel’s K-Factor technology sets itself apart from the pack.
Most aftermarket nozzles rely on standard EDM machining, quick, cheap,
and dirty. But Dynomite Diesel isn’t “most.” Instead of stopping at EDM,
they take it further with Advanced Flow Machining (AFM) and precision
honing that smooths out imperfections, polishes internal surfaces, and
radii the inlet of each orifice. The result? Clean, consistent spray
patterns that make more usable power, not just smoke and heat.
Why K-Factor Nozzles Matter:
- Removes Flow Restriction at Orifice Entrance: Eliminates the natural low-pressure zone where fuel enters the orifice, allowing smoother and faster flow.
- Better Fuel Atomization: Fine mist = cleaner burn. That means less black smoke, lower EGTs, and more bang per drop of fuel.
- Delivers More Fuel at Same Pressure: Pushes more volume through a smaller hole, yes, really. It’s about optimized shape, not just size.
- Reduces Turbulence: Smoother internal geometry minimizes swirl and pressure loss inside the nozzle, no flow drama here.
- Improved Power and Efficiency: With better atomization comes better combustion, and that means more horsepower, cooler temps, and increased fuel mileage.
- Less Smoke, More Go: Bigger isn’t always better, smoky, hot tunes waste fuel. K-Factor nozzles strike the perfect balance for performance builds and daily drivers alike.
Dynomite starts with blank nozzles or custom machined pieces based on specific spray angle requirements. Each nozzle goes through a proprietary honing process, no shortcuts. The end result? A nozzle that not only flows more but does so smarter, delivering cleaner, cooler, more efficient power than the competition. Whether you're building a mild street truck or an all-out track monster, K-Factor Nozzles give you the edge where it counts, in real world performance.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
White smoke? Hard Start? Missing or ticking noises? No start at all? It could be that you have 1 or more bad injectors. While common rail injectors are a necessity with today's engines to create the efficiency and power, they are also susceptible to wear more so than older, non-common rail injectors, as they are exposed to extremely high pressures. Replace your faulty factory injectors with Dynomite Diesel's brand new stock power level injector for your 22-24 6.7L Cummins. There are 2 different types of 6.7L engine options available and they have different injectors. Please be sure to select the correct model of engine to insure you receive the correct injectors. Available in Standard Output and High Output for stock power levels.
- Injectors Sold Individually
Dynomite Diesel K-Factor Injector Nozzles – Precision. Performance. Power.
When
it comes to injector nozzles, it’s not just about how much fuel you can
dump, it’s about how efficiently you can deliver it. That’s where
Dynomite Diesel’s K-Factor technology sets itself apart from the pack.
Most aftermarket nozzles rely on standard EDM machining, quick, cheap,
and dirty. But Dynomite Diesel isn’t “most.” Instead of stopping at EDM,
they take it further with Advanced Flow Machining (AFM) and precision
honing that smooths out imperfections, polishes internal surfaces, and
radii the inlet of each orifice. The result? Clean, consistent spray
patterns that make more usable power, not just smoke and heat.
Why K-Factor Nozzles Matter:
- Removes Flow Restriction at Orifice Entrance: Eliminates the natural low-pressure zone where fuel enters the orifice, allowing smoother and faster flow.
- Better Fuel Atomization: Fine mist = cleaner burn. That means less black smoke, lower EGTs, and more bang per drop of fuel.
- Delivers More Fuel at Same Pressure: Pushes more volume through a smaller hole, yes, really. It’s about optimized shape, not just size.
- Reduces Turbulence: Smoother internal geometry minimizes swirl and pressure loss inside the nozzle, no flow drama here.
- Improved Power and Efficiency: With better atomization comes better combustion, and that means more horsepower, cooler temps, and increased fuel mileage.
- Less Smoke, More Go: Bigger isn’t always better, smoky, hot tunes waste fuel. K-Factor nozzles strike the perfect balance for performance builds and daily drivers alike.
Dynomite starts with blank nozzles or custom machined pieces based on specific spray angle requirements. Each nozzle goes through a proprietary honing process, no shortcuts. The end result? A nozzle that not only flows more but does so smarter, delivering cleaner, cooler, more efficient power than the competition. Whether you're building a mild street truck or an all-out track monster, K-Factor Nozzles give you the edge where it counts, in real world performance.
